Hurricane code · Palm Aire · Broward County
Palm Aire Window Code: Pompano Beach or Fort Lauderdale Permit?
It depends on the parcel. Palm Aire Country Club condos are in the City of Pompano Beach, which issues permits through Click2Gov and ePlan. The Palm Aire Village houses near Cypress Creek Road joined Fort Lauderdale after a 1999 vote and use LauderBuild. Both halves are in Broward's High-Velocity Hurricane Zone at 170 mph.
Last checked: November 18, 2026 · General information, not engineering or legal advice. Confirm requirements for your address with the building department.
Why does one golf community have two permit offices?
Palm Aire is a name, not a government. The Country Club side, with its numbered condo buildings, villas and golf courses, sits inside the City of Pompano Beach. Palm Aire Village, a pocket of single-family houses in the southwest corner near Cypress Creek Road, sits inside the City of Fort Lauderdale.
The split is older than many people think. In 1999 the Legislature passed HB 1563, which became Chapter 99-466, Laws of Florida, on May 26, 1999. The bill did not divide Palm Aire between two cities. Its own boundary description already used existing Pompano Beach and Fort Lauderdale city lines from the 1970s. What it did was deal with the last unincorporated piece, the "Palm Aire Village Area."
The bill told Broward County to hold an election. Only voters living in that area could vote, and they had to pick one city: Fort Lauderdale, North Lauderdale or Pompano Beach. A runoff was set for October 4, 1999 if no city won a majority. The winning city took over the area effective September 15, 2000. The City of Fort Lauderdale says Palm Aire Village West residents voted in 1999 to join Fort Lauderdale.
Is any part of Palm Aire still unincorporated?
We found none. On November 18, 2026 we checked points across Palm Aire and the land around it in the US Census Bureau geocoder. Every home area came back as Pompano Beach or Fort Lauderdale. Broward County's list of the unincorporated neighborhoods it still serves directly does not include Palm Aire.
So no Palm Aire window job goes to the Broward County building office as the permit issuer. If a website tells you Palm Aire permits go through the county, check your parcel before you file anything.
How do you confirm which city your address is in?
Look up your parcel on the Broward County Property Appraiser site. Search by address and open the record. The site address shows the city, and the record also lists a millage code and a fire district. Both point to the same city that issues your building permit.
- Search the address. Use the Property Appraiser's address search. Condo units show a unit number and a legal line such as "Palm-Aire Country Club Apts Condo" with the condo's number.
- Read the city and millage code. In our sample, Palm Aire Country Club condos showed Pompano Beach with millage code 1512. Palm Aire Village houses showed Fort Lauderdale with millage code 0312.
- Check the fire district. Pompano Beach parcels listed Pompano Beach Fire Rescue. Fort Lauderdale parcels listed Fort Lauderdale Fire-Rescue. If the city and fire district disagree, call the Property Appraiser before you apply.
- Do not trust the ZIP alone. Country Club condos we sampled use ZIP 33069. Village houses use 33309. A mailing address is not a jurisdiction, so the parcel record is what counts.
| Part of Palm Aire | City on record | Millage code | Zoning shown | Year built (sample) |
|---|---|---|---|---|
| Country Club condos (S Palm Aire Dr, N Palm Aire Dr, S Course Dr, Oaks Ln, Oaks Dr) | Pompano Beach | 1512 | RM-45 Multiple-Family Residence | 1969 to 1980 |
| Palm Aire Village houses (NW 65th St, NW 66th Dr) | Fort Lauderdale | 0312 | RS-5 County | 1973 |
Why does a Fort Lauderdale house show county zoning?
This is the clearest trace of the 1999 law. Section 9 of HB 1563 said Broward County's land use and zoning rules would stay in force after annexation, as the new city's own rules. Changing them takes a vote of a majority of the full city commission plus one.
That is why the Village houses we sampled still show "RS-5 County" zoning on the Property Appraiser record. For a window job this rarely matters, since the building code, not zoning, sets the wind rules. It matters if your project grows into an addition or a new opening. Then ask Fort Lauderdale zoning staff which standards apply.
What does the Pompano Beach side need for a window permit?
Most of Palm Aire files with the Pompano Beach Building Department at City Hall, 100 West Atlantic Blvd. The application number is created in Click2Gov, and plans and documents are uploaded as PDFs in ePlan. The two systems use separate logins. Our Pompano Beach hurricane code guide covers the city-wide checklist, so here are the points that catch Palm Aire condo owners.
- Use the current Broward County Uniform Building Permit Application. Pompano Beach accepted the older form only through December 31, 2025. The new form (rev. 11/14/2025) asks up front whether a private provider is involved.
- Plan for the Fenestration Flashing, Buck, and Mullion Installation Affidavit. Since February 16, 2021 the city has required it at the attachment inspection of every new or retrofit window and door. The permit holder signs it and hands it to the inspector.
- Bring the association's approval. Condo window permits in Pompano Beach need an association letter, and owner/builder permits are not allowed for condo work.
- Pompano Beach accepts either a Miami-Dade NOA or a Florida Product Approval, as long as it covers each opening's size and design pressure.
What changes on the Fort Lauderdale side of Palm Aire?
Palm Aire Village homes file with Fort Lauderdale's Development Services Department through LauderBuild, the city's online Accela portal at aca3.accela.com/FTL. The city no longer takes paper applications or plans for new submissions. Inspections are scheduled through Customer Service at 954-828-6520.
The paperwork differs from the Pompano Beach side in one way owners notice. Fort Lauderdale's window and door checklist asks for a Miami-Dade NOA for each product, along with the Broward County Uniform Retrofit Window and Door Schedule. Two neighbors a mile apart, both called Palm Aire, can be held to different product paperwork.
The Village houses we sampled were built in 1973. A house with a mean roof height under 30 feet may use the Broward County Fenestration Voluntary Wind Load Chart for design pressures. Home Owners of Palm Aire Village, Inc. is on the city's list of recognized neighborhood associations. We found no sign that it approves or rejects window designs, but check your deed for any recorded restrictions.
What can a Palm Aire condo board require for new windows?
The Country Club buildings are mostly 1969 to 1980 condos, so the association usually comes first. Florida Statute 718.113(5) says every condo board must adopt hurricane protection specifications for each building. They can cover color, style and other factors, and they must meet the building code.
The board cannot refuse an owner's installation that meets those specifications. It may require a unified look across the building. Hurricane protection that follows the statute is not treated as a material alteration. Get the specification sheet for your exact building number before you pick a frame color or glass tint, since Palm Aire has many separate numbered condos.
Do milestone inspections affect Palm Aire condo window work?
They can. Florida Statute 553.899 requires a milestone inspection for condo buildings with three or more habitable stories. It is due by December 31 of the year the building turns 30, then every 10 years. Every Country Club building in our sample is well past 30.
Building heights vary. One listing describes a building on Oaks Drive as 10 stories. A building with fewer than three habitable stories falls outside the statute. If your building is three stories or taller, ask the manager whether a phase one or phase two report is open. Repairs to balconies or walls can change when, and how, windows get replaced.
Height also changes the wind design. Above a 30-foot mean roof height, Broward requires signed and sealed site-specific wind loads from a Florida engineer or architect instead of the generic chart.
Which flood zones are in Palm Aire?
Palm Aire sits inland, but its fairways and lakes create a mix of zones. We checked FEMA's National Flood Hazard Layer at geocoded Palm Aire addresses on November 18, 2026. Points are approximate, so look up your own building.
| Sampled address area | City | Flood zone |
|---|---|---|
| S Palm Aire Dr near 2501, S Pompano Pkwy near 551 | Pompano Beach | X (minimal flood hazard) |
| Oaks Ln near 575, S Course Dr near 3001, N Palm Aire Dr near 2600 | Pompano Beach | X (0.2% annual chance) |
| N Palm Aire Dr near 3200, S Palm Aire Dr near 2851 | Pompano Beach | AE (combined riverine and coastal floodplain) |
| Oaks Dr near 625 | Pompano Beach | AH, base flood elevation 8 ft |
| Palm Aire Village, NW 65th St and NW 66th Dr | Fort Lauderdale | AH, base flood elevation 10 ft |
What wind speed and code edition apply in Palm Aire?
The same rules apply on both sides of the city line. All of Broward County is in the Florida Building Code's High-Velocity Hurricane Zone. Section 1620.2 sets 170 mph for typical Risk Category II buildings. Some sales pages say ZIP 33069 is outside the HVHZ. That is not how the code works, because the zone covers the whole county.
The Florida Building Code 9th Edition is scheduled for December 31, 2026. A permit applied for after that date may fall under the new edition, so ask which edition your application will use.
What should a Palm Aire owner gather before a written quote?
- The Property Appraiser record showing your city, millage code and folio number.
- Your condo's number and its hurricane protection specification sheet, or your deed restrictions for a Village house.
- Number of stories and whether any milestone report is open.
- Your flood zone from the FEMA map.
- Width, height and type of each opening, plus photos of sliders that open onto shared walkways.
- After the work: a wind mitigation inspection on form OIR-B1-1802 can document the new opening protection for your insurer.
- Questions? Call (754) 303-7130 or send your measurements for a written quote.
Palm Aire questions
Is Palm Aire in Pompano Beach or Fort Lauderdale?
Did HB 1563 split Palm Aire between two cities in 1999?
Does Broward County issue window permits in Palm Aire?
Does my Palm Aire condo board have to approve impact windows?
Why do Palm Aire Village houses show county zoning?
Is Palm Aire in a flood zone?
Sources
- Florida Senate - HB 1563 (1999), Broward Co./Cities/Corporate Limits, Ch. 99-466
- Florida Senate - HB 1563 enrolled text
- City of Fort Lauderdale - Palm Aire Village West Neighborhood Mobility Masterplan
- Broward County Property Appraiser - property search
- Broward Municipal Services District - unincorporated neighborhoods
- US Census Bureau Geocoder
- City of Pompano Beach - Apply for a New Permit
- City of Pompano Beach - New Broward County Uniform Building Permit Application
- City of Pompano Beach - Fenestration Flashing, Buck, and Mullion Affidavit
- City of Fort Lauderdale - LauderBuild
- City of Fort Lauderdale - Neighborhood Associations
- Florida Statutes 718.113 - Maintenance; limitation upon improvement; hurricane protection
- Florida Statutes 553.899 - Mandatory structural inspections
- FEMA National Flood Hazard Layer
- FIU Facilities - Wind Velocity Tables (FBC 1620.2)
- Broward County Fenestration Voluntary Wind Load Chart
- Homes.com - Palm Aire building listing (context only)
- Wikipedia - Florida Building Code