Hurricane code · Wilton Manors · Broward County

Which hurricane code applies to windows in Wilton Manors

Wilton Manors is in Broward County's High-Velocity Hurricane Zone, so windows and doors must be impact rated with a Miami-Dade NOA or Florida Product Approval, or be permitted shutters. Permits come from the city's Community Development Services at 2020 Wilton Drive, through the Citizenserve portal. Typical homes use a 170 mph design gust.

Last checked: November 3, 2026 · General information, not engineering or legal advice. Confirm requirements for your address with the building department.

Wilton Manors · Opening schedule workshop

Build your Wilton Manors window schedule before comparing quotes

Give each opening a label, describe what moves and what stays fixed, and record approximate dimensions. These notes help you compare the same scope across proposals and prepare for the window and door schedule requested by the City of Wilton Manors.

Existing arched window with a divided-light pattern
Record the arch and the existing divisions when describing this opening.

Real South Florida work. The precise city of these projects has not been verified.

Start with the arrangement

An arch, a transom and a moving panel are different information

A single width and height can hide several decisions. Record the outline of an arched opening, the divisions between units and which panels open. For an existing window, photograph both sides and note the room label so the images stay connected to the correct line of the schedule.

The examples come from separate projects and illustrate how to describe different arrangements for a quote.

Dark double entry door with frosted glass and a separate arched transom
The moving door leaves and the fixed transom need distinct descriptions in a window and door schedule.

Use the City checklist to separate your notes from technical review

Wilton Manors publishes a dedicated window, door and shutter checklist. It calls for a completed schedule and supporting product and wind-pressure documents. Build your opening list first, then share it with your permit preparer for the technical package.

Who supplies each part of the opening record
You can collectNeeds confirmation
Opening label, room and a photographThe same label on the project plan and final schedule
Approximate width and heightOrder dimensions, clearance, buck and anchoring conditions
Desired moving panels, arch, finish and glassThe exact supported product and assembly
Written association appearance rules, if applicableRequired approval documents and project-specific design pressures

Open the City’s window, door and shutter checklist

Your working notes

Make one list you can send to every quote provider

Label openings W1, W2 or D1, add the room or wall, and leave uncertain dimensions blank. Fractions such as “35 1/2” are accepted as written notes. This worksheet organizes your observations; it does not calculate a product size, design pressure or permit approval.

Opening 1

1 opening row. Your notes stay in this page until you download them.

Watch for the moving panels

Describe the opening before choosing a product

In this walkthrough, look for the panels that slide and the glass that stays fixed. On your list, describe the operating direction, the number of panels and the overall arrangement you want reviewed. A visual example does not establish the size or technical performance of a product.

Silent video description: A visual walkthrough of dark-frame windows and sliding doors opening onto a waterfront balcony. Project city unverified.

Real project footage · 15 seconds · sound removed

Carry your list into the project builder

Keep the downloaded notes beside you when entering openings in SmartWay. Review each available configuration, finish and glass option. Supported combinations can receive verified material pricing; others go to specialist review. Installation and municipal review are separate steps.

The Island City: a small, old, water-ringed city with its own permit desk

Wilton Manors calls itself the Island City because water surrounds it. The city also wraps around a second municipality, the Village of Lazy Lake, which is separately incorporated. The 2020 census counted 11,426 people here.

The story starts as the Colohatchee settlement in the late 1800s and early 1900s, when a Florida East Coast Railroad stop near today's NE 24th Street carried that name. Developer Ned Willingham coined the name Wilton Manors in 1925. The place became a village in 1947 and a city in 1953.

That history shapes your windows. Most of the housing was built long before today's wind rules, and the city runs its own building desk. A Wilton Manors address is permitted by Wilton Manors, not by Fort Lauderdale, even when your mailing address says Fort Lauderdale.

Is Wilton Manors in the HVHZ, and what wind speed applies?

Yes. Wilton Manors is in Broward County, and Broward and Miami-Dade together form the High-Velocity Hurricane Zone (HVHZ) in the Florida Building Code. It is the strictest wind section in the state code. Palm Beach County is not held to it.

You may see contractor pages call Wilton Manors a wind-borne debris region instead. That wording is looser. The HVHZ status comes from the county, and the city does not publish a separate map that changes it.

The code in effect is the Florida Building Code, 8th Edition (2023), which took effect December 31, 2023. In the HVHZ, FBC Section 1620.2 sets the Broward design wind velocity (3-second gust) for Risk Category II buildings, which covers typical homes, at 170 mph. Risk Category I is 156 mph, Category III is 180 mph and Category IV is 185 mph. Those figures come from a secondary table, so treat 170 mph as the working number and let your permit reviewer confirm it.

The HVHZ idea itself dates to Hurricane Andrew in 1992. Florida replaced more than 400 local codes with one statewide code, and the 1994 South Florida Building Code created the zone that Broward still lives under.

What the city's own Windows, Doors and Shutters checklist says

Wilton Manors Community Development Services publishes a checklist titled Windows, Doors and Shutters. It exists to speed review by making sure every required document is in the first submission. It asks for a building permit application and a minimum online plan submittal.

Two lines matter most to a homeowner. First, windows and doors must be impact resistant unless they are shuttered. Second, if they are not impact windows, a shutter permit is required for each opening. So the city treats impact glass and permitted shutters as two ways to meet the same rule.

  • Impact windows and doors, or a permitted shutter for every opening.
  • A homeowner's association approval letter, when one applies.
  • Bedroom windows must meet emergency egress rules under FRC-310 for new construction only.
  • Plans and the permit card printed and kept on site for inspections, as the city's stamped-packet guide requires.

Where you pull the permit: Community Development Services at 2020 Wilton Drive

Building permits come from the City of Wilton Manors Community Development Services department, 2020 Wilton Drive, phone (954) 390-2180. Listed hours are Monday to Thursday, 7:00 AM to 6:00 PM. Inside it, the Construction Services Division administers the Florida Building Code, fire inspections, permits and job-site inspections.

All permits are submitted electronically. The city uses the Citizenserve portal, and a city notice says the city returned to Citizenserve for permitting, licensing and code on Tuesday, February 17, 2026. The city posts how-to guides for creating an account, applying under the online services menu, checking status and requesting inspections.

Fort Lauderdale next door uses a different system, LauderBuild on Accela, and has taken no paper applications since January 1, 2024. Do not mix the two portals up.

  1. Create a Citizenserve account. Follow the city's how-to guide for new users before you start an application.
  2. Apply under the online services menu. Choose the building permit application and upload the plan submittal the checklist lists.
  3. Request inspections online. A request filed before 4:30 PM is handled the next business day.
  4. Keep the approved packet on site. Print the permit card and the approved plans for the inspector.

Four ZIP codes, and why a ZIP does not tell you who permits

Wilton Manors addresses fall in four ZIP codes. The catch is that ZIP 33305 also covers the Village of Lazy Lake and parts of Fort Lauderdale. Check the city on your property record, not the ZIP, before you pick a portal.

Wilton Manors ZIP codes and what to check
ZIPWhat to knowCheck first
33305Shared with the Village of Lazy Lake and parts of Fort LauderdaleWhich city your parcel sits in
33306One of four ZIPs used by Wilton Manors addressesFlood designation on the FEMA map
33311One of four ZIPs used by Wilton Manors addressesWhich city your parcel sits in
33334One of four ZIPs used by Wilton Manors addressesFlood designation on the FEMA map

Your house's age against the code eras

The median year a Wilton Manors structure was built is 1971, from the Census Bureau's 2023 American Community Survey as reported by an aggregator. About 7,370 housing units are reported. A separate source puts 47.43% of the housing in the 1940s through 1960s.

That is the key local fact. Nearly half the stock predates the 1994 South Florida Building Code amendments, and most of it predates the statewide Florida Building Code of 2002. A typical house here likely has original or early replacement windows that were never designed for impact.

Code era and what it usually means for Wilton Manors windows
BuiltCode eraWhat to expect
Before 1994Before the South Florida Building Code changes after AndrewOften original windows and no opening protection; the biggest gap to current code
1994 to 2002South Florida Building CodeMay have shutters or early impact products; check the paperwork
After 2002Statewide Florida Building CodeShould have approved impact products or shutters; confirm the approval numbers

Product approval, the Broward chart and the 30-foot rule

Every window or door in the HVHZ needs a Miami-Dade Notice of Acceptance (NOA) or a Florida Product Approval for the exact product and size. The approval lists the glass, frame, anchors and design pressure. Your installed unit must match it.

Broward County Board of Rules and Appeals Formal Interpretation #24 governs retrofit of windows, doors, garage doors and shutters on detached one- and two-family homes countywide, including here. Its fenestration chart uses ASCE 7-22. It gives wall pressures by mean roof height (15, 20, 25 and 30 ft), wall zone (4 is the field of the wall, 5 is near corners) and opening size.

If the building's mean roof height is over 30 feet, the chart cannot be used. Those buildings need site-specific design wind loads signed and sealed by a Florida engineer or architect. The same interpretation lets a Florida engineer or architect modify the buck or fasteners listed in an NOA, with a signed and sealed letter or drawing.

Condos, associations and historic review

If an association governs your building, the city's checklist lists an HOA approval letter when one applies. Get it before you submit, so the permit is not held up.

For condominium and cooperative buildings three or more stories tall, Florida Statute 553.899 requires a milestone inspection by December 31 of the year the building turns 30, based on its certificate of occupancy, then every 10 years. Broward's Building Safety Inspection Program is a separate rule. Under BORA Policy 05-05, revised effective August 9, 2024, it requires structural and electrical inspections once a building turns 25, then every 10 years, countywide. One- and two-family homes and buildings under 3,500 square feet are exempt from the county program.

Ordinance 2021-012 created a Historic Preservation Board and requires a certificate of appropriateness for certain work on designated properties. Wilton Drive is covered by the Arts and Entertainment overlay in Article 30. We could not confirm that any specific property needs review for window work, so ask the city before you order.

Flood maps and what past storms did nearby

New FEMA flood maps took effect July 31, 2024. The city's Flood Preparedness page points residents to FEMA's Flood Map Service Center to look up an address. Flood zone and wind code are separate questions, so check both.

In Hurricane Wilma on October 24, 2005, the National Weather Service recorded a 99 mph gust at Fort Lauderdale, just south of the city. News reports described gusts over 100 mph blowing out high-rise windows downtown. Hurricane Irma followed on September 10, 2017. Both storms had FEMA disaster declarations that covered Wilton Manors.

Before you order: three checks

Wilton Manors borders Fort Lauderdale and Oakland Park, with the Village of Lazy Lake inside it.

Florida Statute 713.135 requires a recorded Notice of Commencement to be filed with the permit office before the first inspection when the direct contract is greater than the statutory threshold. Ask your contractor to handle it early.

Homeowners who pull their own permit use the city's Owner/Builder Statement/Affidavit. The text was not available to read, so ask the city what it requires. For insurers, a wind mitigation inspection on form OIR-B1-1802 can document opening protection. To start, send your measurements and get a written quote.

Wilton Manors questions

Do I need a permit to replace windows in Wilton Manors?
Yes. Wilton Manors Community Development Services publishes a Windows, Doors and Shutters checklist and takes applications through its Citizenserve portal. Call (954) 390-2180 to confirm what your project needs.
Is Wilton Manors in the HVHZ?
Yes. Broward County is part of Florida's High-Velocity Hurricane Zone, so Wilton Manors is too. Products need a Miami-Dade NOA or Florida Product Approval for the exact size and type.
What wind speed are windows designed for in Wilton Manors?
For typical homes (Risk Category II) the HVHZ table gives 170 mph, a 3-second gust. Your permit reviewer sets the exact design pressure, and buildings over 30 feet need an engineer's site-specific loads.
Can I use shutters instead of impact windows in Wilton Manors?
Yes, with a permit. The city checklist says windows and doors must be impact resistant unless shuttered, and a shutter permit is required for each opening that is not impact rated.
Does my Wilton Manors condo need association approval?
If an association governs your building, the city checklist lists an HOA approval letter when it applies. Ask your board for it before applying, and check your own rules for approved products.
Does the 40-year recertification affect my windows in Wilton Manors?
Broward replaced its old 40-year program in 2024. It now inspects buildings 25 years or older, then every 10 years, and state milestone inspections start at year 30 for condos three stories or taller. One- and two-family homes are exempt from the county program.